Volume 3, Issue 4, December 2018, Page: 56-61
Study of Dielectric Behavior of Titanium Dioxide-Filled Polypropylene Composites
Rahima Nasrin, Department of Physics, University of Barisal, Barisal, Bangladesh
Sarmin Seema, Department of Physics, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
Md. Abdul Gafur, Pilot Plant & Process Development Centre, Bangladesh Council of Scientific & Industrial Research (BCSIR), Dhaka, Bangladesh
Abu Hashan Bhuiyan, Department of Physics, Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
Received: Nov. 9, 2018;       Accepted: Nov. 30, 2018;       Published: Jan. 2, 2019
DOI: 10.11648/j.ajmsp.20180304.11      View  23      Downloads  7
Abstract
Titanium dioxide (TiO2)-filled isotactic polypropylene (iPP) composites with various contents of TiO2 were prepared using an extrusion molding machine. Scanning electron micrograph shows that the surface of iPP is smoother in comparison to those of iPP/ TiO2 composites with varying TiO2 concentration. The composite of 40 wt% TiO2 contains more agglomerates or larger particles, than the composite of 20 wt% TiO2. With increasing filler content amount of voids and holes is increased on the composite surfaces. The DTA shows two endothermic peaks that represent melting temperatures at 169, 167, 163 and 167°C and thermal degradation temperatures at 435, 437, 448, 462°C of various TiO2 concentrations. While the melting peak of the neat iPP is sharp, the TiO2-loaded composites rather show diffuse melting peaks along with a shift of peaks towards lower temperatures. In AC electrical measurement it is demonstrated that with the increase of frequency, conductivity (σ) increases but dielectric constant (ɛ) decreases of these composites. With varying TiO2 concentration, there is no noticeable change observed in σ where as ɛ value is decrease of these composites. Both σ and ɛ are weakly dependent on temperature. At lower frequency region loss tangent (tanδ) increases with frequency and attains a maximum peak after that tanδ decreases rapidly at higher frequency region. This reverse and usual behavior of tanδ at high frequency can be explained in accordance with Koop’s theory.
Keywords
Dielectric Behavior, Titanium Dioxide, Composite
To cite this article
Rahima Nasrin, Sarmin Seema, Md. Abdul Gafur, Abu Hashan Bhuiyan, Study of Dielectric Behavior of Titanium Dioxide-Filled Polypropylene Composites, American Journal of Materials Synthesis and Processing. Vol. 3, No. 4, 2018, pp. 56-61. doi: 10.11648/j.ajmsp.20180304.11
Copyright
Copyright © 2018 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Z. Liu, M.J, Gilbert, “Structure and properties of talc-filled polypropylene: effect of phosphate coating”, J. Appl. Polym. Sci., 59(7), 1087–1098, 1996.
[2]
Y. J. Lee, M. I. Zloczower, D. L. Feke, “Analysis of titanium tioxide agglomerate dispersion in linear low density polyethylene and resulting properties of compounds”,Polym. Eng. Sci., 35(12), 1037–1045, 1995.
[3]
S. H. Mansour, S. L. Abd-El-Messieh, “Electrical and mechanical properties of some polymericcomposites”,J. Appl. Polym. Sci., 83, 1167–1180, 2002.
[4]
A. S. Luyt,J. A. Molefi,H.Krump, “Thermal, mechanical and electrical properties of copperpowder filled low-density and linear low-density polyethylene composites", Polym. Degrad. Stab, 91,1629–1636, 2006.
[5]
Y.Zhou, V. Rangari, H. Mahfuz, S.Jeelani,P. K. Mallick, “Experimental study on thermal and mechanical behavior of polypropylene, talc/polypropylene and polypropylene/clay nanocomposites”,Mater. Sci. Eng., 402, 109–117, 2005.
[6]
L. S. Semko, Ya. I., Kruchek, Yu. A., Shevlyakov, P. P.Gorbik, E. I.Oranskaya, “Effect of TiO2nanoparticles on the resistivity and gas-sensing performance of poly(vinyl chloride)-expanded graphite composites”Inorg. Mat. 43,358–363, 2007.
[7]
H. Zhang, H. Park, X. Zhu, “Influence of surface- modified TiO2nanoparticles on fracture behavior of injection molded polypropylene”, Front. Mater. Sci. 2(1), 9–15, 2008.
[8]
E. Midany, A. Ayman, Ibrahim, S. Suzan,“The effect of mineral surface nature on the mechanical properties of mineral-filled polypropylene composites”, Polym. Bull., 64, 387–399, 2010.
[9]
W. Que, Y. Zhou, Y.L. Lam, Y.C. Chan, C.H. Kam, “Preparation and characterizations of TiO2/organically modified silane composite materials produced by the sol-gel method”, J. Sol-Gel Sci. Techn.20, 187–195, 2001.
[10]
S. Afroze, K. Humayun and M. Rahman, “Elastic and electrical properties of graphite and Talc filler reinforced polypropylene (PP) composites” Inter J. Basic Appl. Sci, 12, 13-16. 2012.
[11]
L. Shengtao, Y. Guilai, N.Fengyan, B.Suna, L. Jianying, T. Zhang “Investigation on the dielectric properties of nanotitanium dioxide-low density polyethylene composites” International Conference on Solid Dielectrics, Potsdam, Germany, July 4-9, 2010.
[12]
K, Zhang, F. Wang, W. Liang,Z. Wang, Z. Duan, and B Yang,“Thermal and mechanical properties ofbamboo fiber reinforced epoxy composites” Polymers, 10, 608-614, 2018.
[13]
P. Chammingkwan, K.Matsushita, T. Taniike, and M. Terano “Enhancement in mechanical and electrical properties of polypropylene using graphene oxide grafted with end-functionalized polypropylene” Materials, 9, 240-248, 2016.
[14]
K. Ahmed, F. Kanwal, S. M. Ramay, A. Mahmood, S. Atiq and Y. S. Al-Zaghayer, “High dielectric constant study of TiO2-polypyrrole composites with low contents of filler prepared by in situ polymerization”, Adv. Cond. Matt.Phys. Article ID 4793434, 6 pages, 2016.
[15]
Y. Chen, Y. H. Cheng, J. B. Zhou, Z. B. Wang, K. Wu, T. Tanaka“Pulsed vacuum flashover of Al2O3/epoxy composite,” International Conference on Electrical Insulating Materials, 2008.
[16]
H. T. Lee, C. S. Liao, and S. A. Chen, “Conductivity relaxation of polyaniline,”Macromolecular Chem. and Phys, 194, 9, 2443–2452, 1993.
Browse journals by subject