Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field

Arturo Mendoza Castrejón; Herlinda Montiel Sánchez; Guillermo Alvarez Lucio; Damasio Morales Cruz

doi:doi:10.11648/j.ijmea.20140206.15

| Peer-Reviewed

Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field

Arturo Mendoza Castrejón, Herlinda Montiel Sánchez, Guillermo Alvarez Lucio, Damasio Morales Cruz

Published in International Journal of Mechanical Engineering and Applications (Volume 2, Issue 6)

Received: 30 November 2014 Accepted: 16 December 2014 Published: 22 December 2014

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Characterization of amorphous ribbon is made by using Vibrating Sample Magnetometry VSM technique with different geometric arrangements: P10, P190, P20 and P290. The purpose is to determine the evolution of the saturation magnetization MS, retentivity MR and magnetic anisotropy K1 as a function of annealing time treatment and also as a function of the geometric arrangement. The rate of change of magnetization ∆M/∆H is determined for orientation P190 and orientation P290. These values of rate of change for the ribbon with no annealing treatment are: 0.122 emu/cm3 and 0.11 emu/cm3, respectively. The highest values of anisotropy are for orientation P190 and for orientation P290, these values are: K1 = 2,365,100 erg/cm3 and K1 = 2,405,520 erg/cm3, respectively. Thus we establish that the amorphous ribbon is a strong candidate for technological applications in the area of the magnetic industry, because they can be designed vector field detectors in three directions: longitudinal, transverse (to the ribbon axis) and normal to ribbon plane.

Published in	International Journal of Mechanical Engineering and Applications (Volume 2, Issue 6)
DOI	10.11648/j.ijmea.20140206.15
Page(s)	111-116
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Retentivity, Magnetic Anisotropy, Saturation Magnetization

References

[1]	W. H. Meiklejohn and C. P. Bean, “New Magnetic Anisotropy,” Physical Review, vol. 105, N. 3, pp. 904–913, February 1957.
[2]	Andrei V. Palii, Boris S. Tsukerblat, Eugenio Coronado, Juan M. Clemente-Juan, Juan J. Borrás-Almenar, “Orbitally dependent kinetic Exchange in cobalt (II) pairs:origin of the magnetic anisotropy,” Polyhedron, vol. 22, pp. 2537-2544, February 2003.
[3]	Giselher Herzer, “Nanocrystalline soft magnetic materials,” Journal of Magnetism and Magnetic Materials, vol. 157/158, pp. 133-136, 1996.
[4]	Tadeusz Kulik, Antonio Hernando,“Magnetic properties of Fe76.5-xCu1NbxSi13.5B9 alloys nanocrystallized from amorphous state,” Journal of Magnetism and Magnetic Materials, vol. 160, pp. 269-270, 1996.
[5]	V. Franco, C. F. Conde, A. Conde, “Changes in magnetic anisotropy distribution during structural evolution of Fe76Si10.5B9.5Cu1Nb3,” Journal of Magnetism and Magnetic Materials, vol. 185, pp. 353-359, 1998.
[6]	Simon Foner, “Versatile and Sensitive Vibrating-Sample Magnetometer,” The Review of Scientific Instruments, vol. 30, pp. 548-557, July 1959.
[7]	David Jiles, Introduction to Magnetism and Magnetic Materials, 1st ed., Chapman and Hall, 1991, pp. 49–52.
[8]	Shoshin Chikazumi, Physics of Magnetism, 1st ed., John Wiley and Sons, 1964, pp. 554.
[9]	B. D. Cullity, Introduction to Magnetic Materials, Addison-Wesley Publishing Company, Inc., 1972, pp. 225-229.
[10]	R. S. Popovic, J. A. Flanagan, P. A. Besse, “The future of magnetic sensors,” Sensors and Actuators A, vol. 56, pp. 39-55, 1996.
[11]	G. Herzer, M. Vázquez, M. Knobel, A. Zhukov, T. Reininger, H. A. Davies, R. Grössinger, J. L. Sánchez Ll, “Round table discussion: Present and future applications of nanocrystalline magnetic materials,” Journal of Magnetism and Magnetic Materials, vol. 294, pp. 252-266, 2005.
[12]	C. Miguel, A. Zhukov, J. J. del Val. J. Gonzáles, “Coercivity and induced magnetic anisotropy by stress and/or field annealing in Fe- and Co- based (Finemet-type) amorphous alloys,” Journal of Magnetism and Magnetic Materials, vol. 294, pp. 245-251, 2005.
[13]	N. Murillo, J. González, “Effect of the annealing conditions and grain size on the soft magnetic character of FeCu(Nb/Ta)SiB nanocrystalline alloys,” Journal of Magnetism and Magnetic Materials, vol. 218, pp. 53-59, March 2000.
[14]	R. Schäfer, S. Roth, C. Stiller J. Eckert, U. Klement and L. Schultz, “ Domain Studies on Mechanically Alloyed Fe-Zr-B-Cu- Nanocrystalline Powder,” IEEE Transactions on Magnetics, vol. 32, No. 5, pp. 4383-4385, 1996.
[15]	R. Valenzuela and J. T. S. Irvine, “Domain Wall dynamics and short-range order in ferromagnetic amorphous ribbons,” Journal of Non-Crystalline Solids, vol. 156-158, pp. 315-318, 1993.
[16]	Arturo Mendoza Castrejón, Herlinda Montiel Sánchez, Guillermo Alvarez Lucio, Rafael Zamorano Ulloa, “Nanocrystallization in Fe73.5Si13.5B9Mo3Cu1 amorphous ribbon and its magnetic properties,” Materials Science Forum, vol. 691, pp. 77-82, 2011.
[17]	P. Kwapuliński, A. Chrobak, G. Haneczok, Z. Stokłlosa, J. Rasek, “Structural relaxation and magnetic properties of Fe86-xNbxB14 amorphous alloys,” Journal of Magnetism and Magnetic Materials, vol. 304, pp. e654-e656, March 2006.
[18]	E. Illeková, D. Janičkovič, M. Miglierini, I. Škorvánek, P. Švec, “Influence of Fe/B ratio on thermodynamic properties of amorphous Fe-Mo-Cu-B,” Journal of Magnetism and Magnetic Materials, vol. 304, pp. e636-e638, March 2006.

Cite This Article

Plain Text BibTeX RIS

APA Style

Arturo Mendoza Castrejón, Herlinda Montiel Sánchez, Guillermo Alvarez Lucio, Damasio Morales Cruz. (2014). Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field. International Journal of Mechanical Engineering and Applications, 2(6), 111-116. https://doi.org/10.11648/j.ijmea.20140206.15

Copy | Download

ACS Style

Arturo Mendoza Castrejón; Herlinda Montiel Sánchez; Guillermo Alvarez Lucio; Damasio Morales Cruz. Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field. Int. J. Mech. Eng. Appl. 2014, 2(6), 111-116. doi: 10.11648/j.ijmea.20140206.15

Copy | Download

AMA Style

Arturo Mendoza Castrejón, Herlinda Montiel Sánchez, Guillermo Alvarez Lucio, Damasio Morales Cruz. Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field. Int J Mech Eng Appl. 2014;2(6):111-116. doi: 10.11648/j.ijmea.20140206.15

Copy | Download

@article{10.11648/j.ijmea.20140206.15,
  author = {Arturo Mendoza Castrejón and Herlinda Montiel Sánchez and Guillermo Alvarez Lucio and Damasio Morales Cruz},
  title = {Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {2},
  number = {6},
  pages = {111-116},
  doi = {10.11648/j.ijmea.20140206.15},
  url = {https://doi.org/10.11648/j.ijmea.20140206.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20140206.15},
  abstract = {Characterization of amorphous ribbon is made by using Vibrating Sample Magnetometry VSM technique with different geometric arrangements: P10, P190, P20 and P290. The purpose is to determine the evolution of the saturation magnetization MS, retentivity MR and magnetic anisotropy K1 as a function of annealing time treatment and also as a function of the geometric arrangement. The rate of change of magnetization ∆M/∆H is determined for orientation P190 and orientation P290. These values of rate of change for the ribbon with no annealing treatment are: 0.122 emu/cm3 and 0.11 emu/cm3, respectively. The highest values of anisotropy are for orientation P190 and for orientation P290, these values are: K1 = 2,365,100 erg/cm3 and K1 = 2,405,520 erg/cm3, respectively. Thus we establish that the amorphous ribbon is a strong candidate for technological applications in the area of the magnetic industry, because they can be designed vector field detectors in three directions: longitudinal, transverse (to the ribbon axis) and normal to ribbon plane.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field
AU  - Arturo Mendoza Castrejón
AU  - Herlinda Montiel Sánchez
AU  - Guillermo Alvarez Lucio
AU  - Damasio Morales Cruz
Y1  - 2014/12/22
PY  - 2014
N1  - https://doi.org/10.11648/j.ijmea.20140206.15
DO  - 10.11648/j.ijmea.20140206.15
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 111
EP  - 116
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20140206.15
AB  - Characterization of amorphous ribbon is made by using Vibrating Sample Magnetometry VSM technique with different geometric arrangements: P10, P190, P20 and P290. The purpose is to determine the evolution of the saturation magnetization MS, retentivity MR and magnetic anisotropy K1 as a function of annealing time treatment and also as a function of the geometric arrangement. The rate of change of magnetization ∆M/∆H is determined for orientation P190 and orientation P290. These values of rate of change for the ribbon with no annealing treatment are: 0.122 emu/cm3 and 0.11 emu/cm3, respectively. The highest values of anisotropy are for orientation P190 and for orientation P290, these values are: K1 = 2,365,100 erg/cm3 and K1 = 2,405,520 erg/cm3, respectively. Thus we establish that the amorphous ribbon is a strong candidate for technological applications in the area of the magnetic industry, because they can be designed vector field detectors in three directions: longitudinal, transverse (to the ribbon axis) and normal to ribbon plane.
VL  - 2
IS  - 6
ER  -

Copy | Download

Author Information

Arturo Mendoza Castrejón

School of Mechanical and Electrical Engineering -IPN, 07738, U. P. Adolfo López Mateos, D. F., México
Herlinda Montiel Sánchez

Technosciences Department, Center for Applied Science and Technology Development -UNAM, 04510, C.U., D. F., México
Guillermo Alvarez Lucio

School of Physics and Mathematics -IPN, 07738, U. P. Adolfo López Mateos, D. F., México
Damasio Morales Cruz

School of Mechanical and Electrical Engineering -IPN, 07738, U. P. Adolfo López Mateos, D. F., México

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Arturo Mendoza Castrejón, Herlinda Montiel Sánchez, Guillermo Alvarez Lucio, Damasio Morales Cruz. (2014). Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field. International Journal of Mechanical Engineering and Applications, 2(6), 111-116. https://doi.org/10.11648/j.ijmea.20140206.15

Copy | Download

ACS Style

Arturo Mendoza Castrejón; Herlinda Montiel Sánchez; Guillermo Alvarez Lucio; Damasio Morales Cruz. Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field. Int. J. Mech. Eng. Appl. 2014, 2(6), 111-116. doi: 10.11648/j.ijmea.20140206.15

Copy | Download

AMA Style

Arturo Mendoza Castrejón, Herlinda Montiel Sánchez, Guillermo Alvarez Lucio, Damasio Morales Cruz. Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field. Int J Mech Eng Appl. 2014;2(6):111-116. doi: 10.11648/j.ijmea.20140206.15

Copy | Download

@article{10.11648/j.ijmea.20140206.15,
  author = {Arturo Mendoza Castrejón and Herlinda Montiel Sánchez and Guillermo Alvarez Lucio and Damasio Morales Cruz},
  title = {Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {2},
  number = {6},
  pages = {111-116},
  doi = {10.11648/j.ijmea.20140206.15},
  url = {https://doi.org/10.11648/j.ijmea.20140206.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20140206.15},
  abstract = {Characterization of amorphous ribbon is made by using Vibrating Sample Magnetometry VSM technique with different geometric arrangements: P10, P190, P20 and P290. The purpose is to determine the evolution of the saturation magnetization MS, retentivity MR and magnetic anisotropy K1 as a function of annealing time treatment and also as a function of the geometric arrangement. The rate of change of magnetization ∆M/∆H is determined for orientation P190 and orientation P290. These values of rate of change for the ribbon with no annealing treatment are: 0.122 emu/cm3 and 0.11 emu/cm3, respectively. The highest values of anisotropy are for orientation P190 and for orientation P290, these values are: K1 = 2,365,100 erg/cm3 and K1 = 2,405,520 erg/cm3, respectively. Thus we establish that the amorphous ribbon is a strong candidate for technological applications in the area of the magnetic industry, because they can be designed vector field detectors in three directions: longitudinal, transverse (to the ribbon axis) and normal to ribbon plane.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field
AU  - Arturo Mendoza Castrejón
AU  - Herlinda Montiel Sánchez
AU  - Guillermo Alvarez Lucio
AU  - Damasio Morales Cruz
Y1  - 2014/12/22
PY  - 2014
N1  - https://doi.org/10.11648/j.ijmea.20140206.15
DO  - 10.11648/j.ijmea.20140206.15
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 111
EP  - 116
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20140206.15
AB  - Characterization of amorphous ribbon is made by using Vibrating Sample Magnetometry VSM technique with different geometric arrangements: P10, P190, P20 and P290. The purpose is to determine the evolution of the saturation magnetization MS, retentivity MR and magnetic anisotropy K1 as a function of annealing time treatment and also as a function of the geometric arrangement. The rate of change of magnetization ∆M/∆H is determined for orientation P190 and orientation P290. These values of rate of change for the ribbon with no annealing treatment are: 0.122 emu/cm3 and 0.11 emu/cm3, respectively. The highest values of anisotropy are for orientation P190 and for orientation P290, these values are: K1 = 2,365,100 erg/cm3 and K1 = 2,405,520 erg/cm3, respectively. Thus we establish that the amorphous ribbon is a strong candidate for technological applications in the area of the magnetic industry, because they can be designed vector field detectors in three directions: longitudinal, transverse (to the ribbon axis) and normal to ribbon plane.
VL  - 2
IS  - 6
ER  -

Copy | Download